x86 Instruction Set Reference

MOVSHDUP

Move Packed Single-FP High and Duplicate

Opcode	Mnemonic	Description
`F3 0F 16 /r`	`MOVSHDUP xmm1, xmm2/m128`	Move two single-precision floating-point values from the higher 32-bit operand of each qword in xmm2/m128 to xmm1 and duplicate each 32-bit operand to the lower 32-bits of each qword.

Description
The linear address corresponds to the address of the least-significant byte of the referenced memory data. When a memory address is indicated, the 16 bytes of data at memory location m128 are loaded and the single-precision elements in positions 1 and 3 are duplicated. When the register-register form of this operation is used, the same operation is performed but with data coming from the 128-bit source register.

Description

The linear address corresponds to the address of the least-significant byte of the referenced memory data. When a memory address is indicated, the 16 bytes of data at memory location m128 are loaded and the single-precision elements in positions 1 and 3 are duplicated. When the register-register form of this operation is used, the same operation is performed but with data coming from the 128-bit source register.

Operation
if(source == m128) { //load instruction xmm1[0..31] = m128[32..63]; xmm1[32..63] = m128[32..63] xmm1[64..95] = m128[96..127]; xmm1[96..127] = m128[96..127]; } else { //move instruction xmm1[0..31] = xmm2[32..63]; xmm1[32..63] = xmm2[32..63]; xmm1[64..95] = xmm2[96..127]; xmm1[96..127] = xmm2[96..127]; }

Operation

if(source == m128) {
	//load instruction
	xmm1[0..31] = m128[32..63];
	xmm1[32..63] = m128[32..63]
	xmm1[64..95] = m128[96..127];
	xmm1[96..127] = m128[96..127];
}
else {
	//move instruction
	xmm1[0..31] = xmm2[32..63];
	xmm1[32..63] = xmm2[32..63];
	xmm1[64..95] = xmm2[96..127];
	xmm1[96..127] = xmm2[96..127];
}

Exceptions
General protection exception if not aligned on 16-byte boundary, regardless of segment.

Numeric Exceptions
None.

Protected Mode Exceptions

`#GP(0)`	For an illegal memory operand effective address in the CS, DS, ES, FS or GS segments.
`#GP(0)`	For an illegal memory operand effective address in the CS, DS, ES, FS or GS segments.
`#SS(0)`	For an illegal address in the SS segment.
`#PF(fault-code)`	For a page fault.
`#NM`	If TS bit in CR0 is set.

Real-Address Mode Exceptions

`#GP(0)`	If any part of the operand would lie outside of the effective address space from 0 to 0FFFFH.
`#GP(0)`	If any part of the operand would lie outside of the effective address space from 0 to 0FFFFH.
`#NM`	If TS bit in CR0 is set.

Virtual-8086 Mode Exceptions

`#GP(0)`	If any part of the operand would lie outside of the effective address space from 0 to 0FFFFH.
`#GP(0)`	If any part of the operand would lie outside of the effective address space from 0 to 0FFFFH.
`#NM`	If TS bit in CR0 is set.
`#UD`	If CR0.EM = 1. If CR4.OSFXSR(bit 9) = 0. If CPUID.SSE3(ECX bit 0) = 0.

Instruction	Latency	Throughput	Execution Unit
`CPUID`	0F3n	0F3n	0F3n
`MOVSHDUP xmm1, xmm2`	6	2	FP_MOVE